Easily convert your Presta valve into a Schrader valve with Genuine Innovations' lightweight, all-aluminum Presta Valve Adaptors. - Card of 12 - Construction: aluminum - Airtight O-Ring Seal/Screw On
- Ball-inflating needle for footballs, basketballs and more
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
If you own an Air-Bob inflator, you probably use it A LOT. When you finally wear out the original inflator head, no problem, here's the replacement part to get you back up and running.
Lezyne's Dual Valve Pump Head is compatible with all high-pressure floor pumps and fits Presta and Schrader valves. Featuring durable composite construction and an aluminum locking lever, it's ready to pump when you are.
$10.99 - $19.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$11.99 - $224.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy. - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants. - Note - unable to ship CO2 to Canada - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2. - All 16g cartridges are compatible with the Airship 2.0.
$11.99 - $49.99
CO2 replacement cartridges Planet Bike's line of CO2 replacement cartridges make tire repairs quick and easy - Our CO2 cartridges work in Planet Bike inflators as well as most competitors' inflators - Planet Bike cartridges are tested to the highest standards for durability, safety and reliability. They contain pure CO2 with no oils or contaminants - 100% recyclable steel cartridges - All threaded cartridges are compatible with Air Kiss, Red Zeppelin, Red Zeppelin 2 & Air Smith CO2 - All 16g cartridges are compatible with the Airship 2.0
Compatible with Planet Bike ALX, AL, STX, ST, and COMP floor pumps - Dual head with hose - Will work with any floor pump Planet Bike has made except for Air Supreme
- Comes with Dual Head - Compatible with all Planet Bike floor pumps - #1002-5 Auto head with hose can be used as a substitute for this item and is compatible with all pumps that used the dual head
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Anyvalve pump head adapts to Presta, Schrader, and Dunlop valves. Details: - Rebuildable internals - Tough aluminum barrel - Ergonomic handle - Includes cage mount - 90 psi max pressure - 162g / 0.35lbs
Comfortable, durable and most of all reliable. Genuine Innovations' Ultraflate Plus is their most tried and true cupped inflator. When they constructed the Ultraflate, they wanted to make sure it was an inflator that was comfortable to hold and built to last. Its reinforced glass nylon construction and brass internals means it can take the strain of every day use and still maintain precision inflation performance. • Trigger Controlled technology • Built in Trigger Lock prevents accidental discharge • Heavy-duty design and construction • Works with both Presta and Schrader valves • Includes one 16 gram non-threaded CO2 cartridge • Cartridge compatibility: 12, 16, 20,25 gram threaded or non-threaded CO2 cartridges & Big Air! (each sold separately) • Construction: Glass reinforced nylon with brass internals. • Weight: 62 grams
Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.
Featuring our simple, proven spring-loaded valve design the Wayside will get your tire aired back up, no muss, no fuss. It'll work with pretty much any threaded CO2 cartridge on the market and is compatible with Presta or Schrader valves. - Thread-On Design—Hold on tight. The thread-on Presta/Schrader valve at the end of the extending flexible hose ensures that even the fiddliest of valves is held securely for inflation. - Faster Inflation—Allows for quick inflation on a road, MTB, CX, or gravel bike. - Anyvalve Pump Head—Works great on Presta, Schrader, and Dunlop valves. No leaking, no fuss, clean and simple. - 3.68oz - Lifetime warranty
- Easy operation right angle threaded co2 tire inflator - Accepts threaded cartridges and big air, includes cartridge - Simple turning motion dispenses gas at a controlled rate - Compact design allows use with disc wheels - Law prohibits ORM-D materials from shipping by air
If it was any lighter, you'd be walking home. This is the smallest pump you'll ever use that will still get your flat fixed and you on your way again. There are no extra features here. Just the bare minimum to get your tire back up and you kicking butt. Because you can't kick butt with a flat tire. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
Genuine Innovations' Second Wind Road Combo gives you the speed and convenience of a CO2 inflator with the security of a hand pump. It fits Presta valves and accepts threaded CO2 cartridges. Should a second flat find you without an additional cartridge the Second Wind functions as a hand pump as well. Plus, the Second Wind is 7 inches long, comes with a 16-gram cartridge, and easily attaches to your bike with the included mount.
$34.99 - $39.99
For super easy inflation Planet Bike's Composite Floor Pump features a rugged composite barrel, a wide, stable base, and Planet Bike's anatomic Love Handle. Plus, it has a long hose with a thumblock head that fits all valves and an easy-to-read, mid-mounted and color-coded gauge.
The pull-out hose puts less stress on the valve. And you weren't stressed to start with. It's all very well hauling a giant pump around, but all that leverage can snap a delicate valve stem right off. Blackburn's Presta-only head sits on a short pull-out hose to give more options on where you pump from and fewer chances of your rippling muscles pulling the thing clean off. We weren't using that space in the barrel anyway, so the hose doesn't even affect the pump's efficiency. - Thread on pump head automatically adapts to Presta valves - Rebuildable internals parts available aftermarket - Flexible hose - Includes Presta valve tool - Frame mount included - 120 PSI, 8.2 Bar maximum - Weight: 127 grams
The pull-out hose puts less stress on the valve. It's all very well hauling a giant pump around, but all that leverage can snap a delicate valve stem right off. This is a slimmer version of Blackburn's Core Pump that features a thread-on Presta-specific head with a short pull-out hose to give more options on where you pump from and fewer chances of your rippling muscles pulling the thing clean off. We weren't using that space in the barrel anyway, so the hose doesn't even affect the pump's efficiency. - Machined Presta valve core tool in the pump's base - Thread-on Presta valve on the extending flexible hose - Fits easily in jersey pocket or next to your bottle cage - 120 PSI - Weight: 104 grams
Combine the best elements of all of Blackburn's mini-pumps and what do you get? The Core CO2'Fer Pump. The Core CO2'Fer is an excellent stand-alone mini-pump that adds the versatility of an integrated CO2 inflator and the peace of mind of a Presta valve tool, ensuring nothing goes wrong when all you need is an inflated tire. A remote inflation hose takes unwanted stress off the tire valve. - Removable CO2 inflator - 120 PSI - Thread-on Presta/Schrader - Retractable hose - Removable Presta valve core tool - Includes 16g cartridge, frame mount, CO2 strap
Inexpensive Doesn't Mean Cheap. The Core 2 pump still shares all the techy bits of its big siblings but is built for folks operating on a smaller budget. The AirTap head will function with Schrader/Presta/Dunlop valves and has an integrated bleed valve for dialing in your pressure. Our aviation-style gauge is 2.5 inches wide, and easy to read. It's also built into the base to add to the stability of the Core 2 during use. Whether you are in the basement, the garage or at the trail head, the Core 2 has you covered. - Dimensions: 4.25 x 9 x 24 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Air Bleed - Button on the pump head to micro-adjust pressure.
A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz
Perfect Pressure. Every Ride. At nearly 28 inches tall, the Core 3 towers over most floor pumps. The 48-inch-long hose is long enough to get air pressure to anywhere you could need it. Like the Pro, the Core 3 features our AirTap head that fits Schrader/Presta/Dunlop valves and has a pressure bleed button built in. We also integrated the easy to read, 3-inch gauge into the massive steel base of the Core 3 to help it have a rock solid stance. - Dimensions: 5.5 x 9 x 26.25 inches Airtap Core Pump Head - Our AirTap reversable pump head works with Schrader, Presta or Dunlop valves and features an integrated air bleed button right at the valve for perfect pressure, every time. Aviation Guage - The 2.5-inch-wide base-mounted gauge lets you easily read your tire pressure, and adds to the footprint of the Core 2 pump's solid stance. Steel is real, strong - The base and barrel of the Core 3 are constructed of steel to withstand a lifetime of (ab)use. Air Bleed - Button on the pump head to micro-adjust pressure.
The Lezyne Digital Pressure Drive takes the guesswork out of pressurizing tires with an easy-to-read digital gauge. This compact system is durable and lightweight thanks to its aluminum construction, and capable of delivering up to 120 psi through a Presta/Schrader-compatible ABS Flex Hose.
Planet Bike's Ozone ATB AL Mini-Pump w/Gauge is a ride-saver. For easy pumping and fast fills, it boasts a sturdy aluminum barrel, a locking T handle, an easy pumping action and a thumblock head (with a cap to keep the mud out). Plus it even has a gauge for getting the pressure just right. This great inflator fits all valves and is small enough to carry in a pack or pocket, or you can use the included frame mount.
Page 1 of 2 Next page